Bring the engine and transmission to normal operating temperature. The easiest way to do this is to check the fluid level right after driving the car for a while. Hold your foot on the brake, and work the shifter slowly through the gears. Give the transmission a second or two in each gear range.
Do you check transmission fluid when it’s hot or cold?
Transmission fluid expands in heat and in order to receive accurate results, it must be under normal operating conditions. If the fluid is checked when the engine is cold, you may get false results indicating the fluid is low. Allow the engine to continue running while you check the level.
Does the engine need to be running to check transmission fluid?
Step 1: Leave the engine running and open the hood to your car. The car must be warm when you check transmission fluid. Step 2: If you have an inline engine, look behind your oil dipstick, toward your windshield, to locate the transmission fluid dipstick.
How long should a car run before checking transmission fluid?
Let it run for about 5 minutes so that it can warm up. Some car manufacturers will recommend you turn the engine off before checking the transmission fluid, but most don’t recommend this.
What are the symptoms of low transmission fluid?
Signs of Low Transmission Fluid
- Noises. If your transmission is working properly, you shouldn’t hear any noise while you’re driving as it should transition smoothly. …
- Burning Smell. Any foul smell coming from your car should direct you to your nearest service center. …
- Transmission Leaks. …
- Slipping Gears.
Do I add transmission fluid while car is running?
Your car’s engine should be running when you add fluid to the transmission, but you should have the transmission in park and the handbrake activated for safety. Check the owner’s manual for instructions on selecting the correct transmission fluid for your vehicle.
Can you add transmission fluid through dipstick?
Observe markings at end of dipstick. Your dipstick might have two markings for “full”—one warm, one cold. If the automatic transmission fluid level does not come up to the “warm” line, you’ll need to add automatic transmission fluid. Insert long funnel into automatic transmission fluid dipstick hole.
Can you just add more transmission fluid?
You can add more by inserting a funnel into the tube the dipstick was withdrawn from and pouring a small amount of automatic transmission fluid into the pipe. Check the level each time you add a little until the level is right between the two lines.
What happens if you drive with low transmission fluid?
Low-quality transmission fluid – or driving without transmission fluid altogether – can cause a number of problems such as transmission failure, gear slipping, a hard time shifting, and a few more issues.
How long can a transmission last without fluid?
The manufacturer’s maintenance schedule for many automatic transmissions doesn’t call for fresh fluid until 100,000 miles or, with some Ford transmissions, even 150,000 miles. A lot of mechanics say that is too long and that it should be done at least every 50,000 miles.