fords reccomended fluid for the 4R100(E4OD) is standard mercon(dextron III).
Can you use Mercon LV in a 4R100?
DO NOT USE MERCON V IN A STOCK 4R100 (all you have to do is read your owners manual to know this) If the seals have been changed in a rebuild it’s OK but, as alaskan155 correctly points out, it’s a Bad Idea for our stock transmission.
How many quarts of fluid does a 4R100 transmission take?
Ford 4R100 Transmission Service Procedures (1999 – 2003 Ford Super Duty) Place a suitable container beneath the transmission pan (note – though the transmission fluid capacity is ~17 quarts, only about half of the ATF fluid capacity will be drained after removing the pan).
What kind of transmission fluid does a 7.3 Powerstroke take?
How Much Oil And Fluid Do I Need in my 7.3l Powerstroke?
|Oil/Fluid||Specs||Capacity – Quarts|
|Auto Transmission Fluid||E40D 4×2 E40D 4×4 4R100||15.9 quarts 16.4 quarts 17.1-17.7 quarts|
|Manual Transmission Fluid||ZF S5 5-speed ZF S6 6-speed||3.4 quarts 5.8 quarts|
|Transfer Case||BW1536||2.0 quarts|
|Coolant||50/50 mixture||94-97 1999-2003|
What transmission fluid does Ford recommend?
MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
What kind of transmission fluid does a 2000 Ford f250 take?
The transmission fluid capacity for the 2000 Ford F-250 iS6. 8 pints for the 5 & 6-speed manual and 6.4 quarts for initial fill or 17 quarts for total fill for the 4-speed automatic transmission. The type that should be used for the truck is Mercon V.
What is compatible with Mercon V?
A Quick Comparison Table
|Fluid name||Mercon V||Mercon LV|
|Compatibility||Compatible with ford model, Dexron III, and Type H and Type CJ fluid||Compatible with ISO 46 or SAE 20W viscosity grade hydraulic oil|
|Usability||A range of ford models and certain power steering pump reservoirs||Suitable for Ford, Lincoln and Mercury vehicles|
Are all 4R100 transmissions the same?
The Ford E4OD and 4R100 four-speed automatic transmissions were basically the same exact transmission, just with different names. The Ford E4OD transmission was updated in 1998 to the newer 4R100. … The 4R100 also matched Ford’s big 7.3-liter Power Stroke diesel engines from 1999 through 2003.
Is the 4R100 a good transmission?
The 4R100 is a computer controlled 4-speed automatic with a 1,000 lb-ft capacity from the factory. … However, like any high-mile automatic transmission, your 4R100 is sure to have some wear that should be addressed before you pump more power through it. Though it’s a good transmission, the 4R100 can be made be better.
Is Mercon V transmission fluid synthetic?
Is Mercon V Synthetic? Mercon V is a fully synthetic Automatic Transmission fluid.
What kind of oil does a 7.3 diesel take?
Ford recommends a 15W-15 multigrade oil as the best default oil for 7.3 engines. Many Ford dealerships only use this oil for 7.3 Powerstroke Diesel Engine. Shell Rotella T5 is labeled as Multigrade engine oil.
What kind of transmission fluid goes in a 2000 Ford f350?
The type of transmission fluid that should be used in the 2000 Ford F-350 is Mercon V. It used to use just Mercon but it was changed to Mercon V.
Can I use Mercon V instead of Mercon SP?
CAUTION: MERCON®, MERCON®V and MERCON®SP are not interchangeable transmission fluids. Use of any fluid other than the recommended fluid may cause transmission damage.
Can I use Mercon LV instead of Mercon V?
It is the newest “low viscosity” synthetic formula. It is for all 2008 and newer Ford vehicles. Mercon V is not compatible with Mercon LV.
Is Mercon LV the same as dexron VI?
KLONDIKE DEXRON®-VI / MERCON® LV Full Synthetic Automatic Transmission Fluid is an OEM approved fluid registered with General Motors for DEXRON®-VI and Ford Motor Company for MERCON® LV. … This specification is fully backwards compatible and replaces all previous generation DEXRON fluids.