How fast is a 15 hp boat motor?

Two stroke 15 yamaha pushes my 3.7 tinnie along at 15 – 17 knots, depending on the tide.

How fast will a 15hp outboard go?

I clocked my setup with gps at 28 mph with me and my gear. Me and just the boat it will hit 32 mph on glass days. 2 guys and gear takes it down to about 20 to 22 mph.

How fast does a 20 hp boat motor go?

How fast will a 20hp outboard go? – Quora. About 500 km/h if you drop it from high enough. The question is meaningless unless you specify what it is attached to, how much load, what size propeller you have etc. It depends on the size, weight, and type of the boat.

How fast is a 10 hp motor?

As a practical matter , you can get from fifty to maybe eighty mph with a ten hp engine on a light weight motorcycle if you tuck in and have a good fairing . This means a racing style bike at the hight end. May be twenty five to thirty five mph in a light weight automobile with low aero drag on a level road.

INTERESTING:  Does the AC compressor affect the engine?

How fast does a 9.9 HP go?

A 9.9hp O/B gives you 20mph and a max plate of 30hp. With a 5 knot following sea the motor will give you 5 knots not running.

What’s the weight of a 14 ft aluminum boat?

You can find some v-hull designs that are in the 150-pound range, which are reasonably easy to move around. But flat-bottomed jon boats tend to weigh more. Add in under-floor storage and a wider design and weights approaching 300 pounds are possible.

How fast is a 25hp outboard?

A 25hp Pontoon boat will not be very fast, with an expected maximum speed of between 5 and 10 mph.

How heavy is a 15 hp Yamaha outboard?

Specs & Compare

Engine Type 2 cyl
Weight † 57 kg (126 lbs) – 66 kg (146 lbs)
Recommended Fuel Octane 87
Recommended Engine Oil Yamalube® 4M (See owner’s manual)
Recommended Fuel Filtration Yamaha 10-Micron Fuel/Water Separating Filter (external)

How fast will a 40 hp outboard go?

A 40hp Pontoon boat with an average load of people can expect to reach speeds of around 10 – 15 mph. A lot depends on the size of the pontoon boat, how many people are on it, and the weather conditions.

How fast is 60 horsepower?

16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.

How fast is a 9.9 hp boat motor?

Assuming this is a light 14′ utility boat and a standard 9.9, Mercury would recommend a 8.5 to 9.5 pitch prop for the OP’s application and predicts a top speed around 20 mph. In my experience with similar craft and outboards, this sounds very reasonable.

INTERESTING:  Which is the best 3 cylinder engine?

How fast will a 14 foot jon boat go?

14ft Alumacraft T-14s with 15 HP Honda. Tops out at about 25 mph with just me in the boat.

What size motor do I need for a 14 foot boat?

Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.

How fast does a 8hp outboard motor go?

5 4 blade prop and manual JP tops out 20 to 21 mph. (6) 1436 G3 with 8hp merc tops out 16 to 18 mph.

What’s the biggest motor you can put on a jon boat?

For Jon boats between 8 foot and 16 foot, 8 hp – 20 hp motors will offer more than enough power to push the boat upstream, achieve a respectable speed and get the boat on plane. 18 + foot Jon boats can usually take a 20 – 25 hp outboard motor.

What is a 1436 jon boat?

A 1436 Jon boat is a flat bottom, shallow draft watercraft used almost entirely on inland bodies of water. The 1436 number in the name refers to the length of the boat and the width of its bottom. A 1436 Jon boat is 14 foot long and has a bottom that is 36″ wide.