How many amps does a .5 HP motor draw?
Example: A 5 HP motor at 230V, 3PH is12. 4 amps.
How many amps does a 1.5 hp submersible pump draw?
1.5 hp is 1152 watts. If you use 120 volts, the current is: 9.6 amps.
How many amps does a 0.5 HP pump draw?
0.5hp is 373W, so @ 220V thats 1.7amps secondary side, primary side will be at least double that approx 3.5amps.
How many amps does a 1/3 hp pump draw?
About 6 amps is average for a 1/3 hp motor operating at 120 volt. Its a good idea to have it on a dedicated circuit or a circuit thats ” known” not to have alot of load on it.
How many amps does a 5 hp motor draw at 480 volts?
AC Motor Full Load Amperes
HP | 200 Volts | 440-480 Volts |
---|---|---|
3 | 11 | 4.8 |
5 | 17.5 | 7.6 |
7.5 | 25.3 | 11 |
10 | 32.2 | 14 |
What size breaker do I need for a 5 hp air compressor?
A 5hp single phase AC motor has a load current of 28 Amps. So 10GA. wire with a 30 Amp breaker will work.
How many amps does a 5 hp submersible pump draw?
Franklin 5 HP Deep Well Submersible Pump Motor,3-Phase,3450 Nameplate RPM,230 Voltage – 2343178602
Item | Deep Well Submersible Pump Motor |
---|---|
Full Load Amps | 15.9 |
Max. SF Amps | 17.8 |
Hz | 60 |
Motor Service Factor | 1.15 |
How many amps does a 1 hp pump draw?
A 240 volt, 1 horsepower well pump draws 10 amps of current. When the pump starts, it can draw up to 35 amps, but only for 5–10 seconds.
How many amps does a 1 hp submersible pump draw?
A 1 HP submersible pump engine will draw a 3.2-amper current if it is a single-phase motor at 230 volts of voltage. If it is a three-phase motor at 440 volts, it will draw a maximum 1.7-amper current.
How much electricity does a 0.5 hp motor consume?
Assuming the motor runs at its full 0.5 HP capacity, that’s 373 W for 20 minutes, which is equivalent to 0.124 kWh. If energy in India costs 5 rupees per kWh, that’s about 0.62 rupees. The tariff is Rs 5/ kwh, 30 days in a month.
What is the full load current of a 1 hp motor?
Full Load Current: Three Phase AC Motors
Motor Horsepower | Motor Ampere | |
---|---|---|
1 | 230V 460 V | 4.2 2.1 |
1-1/2 | 230V 460V | 6.0 3.0 |
2 | 230V 460V | 6.8 3.4 |
3 | 230V 460V | 9.6 4.8 |
How many amps does a 1/4 HP sump pump draw?
Sump Pump power usage depends on the size of the sump pump you have, a small 1/4hp Sump pump will usually use around 600 watts and require around 3.5-4 amps, while a larger 1hp sump pump will use as much as 2000 watts and 10amps.
How many amps does a 1/4 HP motor draw at 120 volts?
AC Motor Full Load Amperes
HP | 110-120 Volts | |
---|---|---|
1/10 | 3 | 1.5 |
1/8 | 3.8 | 1.9 |
1/6 | 4.4 | 2.2 |
1/4 | 5.8 | 2.9 |
Should a sump pump be on a 20 amp breaker?
Electrical Wiring for a Sump Pump Circuit
The wire size that should be used for the 20 amp septic sump pump circuit should be #12 gauge. The sump pump should be protected by either a GFCI outlet or a GFCI circuit breaker.