How much fluid does a Allison Transmission hold?

7.4 quarts (includes the pint for the spin-on) for the stock (shallow) pan – all you can drain. Torque for the drain plug is 25 foot pounds. Be careful not to overfill the transmission.

How many quarts of fluid does an Allison Transmission hold?

Allison 3000 transmissions can hold approximately 29 quarts of fluid; the larger Allison 4000 can hold approximately 48 quarts.

How much fluid does Allison 1000 need?

7.4qts for just a pan drain, plan on 2 gallons with a filter change and your in the ballpark.

What fluid goes in an Allison transmission?

Mobil Delvac 1 ATF is a fully synthetic fluid recommended by Allison Transmission, Inc. and approved against the Allison TES-295 and TES-468 Specifications. The fluid is designed to meet the demanding requirements of modern heavy-duty automatic transmissions.

What kind of transmission fluid does Allison 1000 take?

Allison Transmission TES 295® Approved Fluids are approved for use in Allison 1000 Series™, 2000 Series™, 3000 Series™, 4000 Series™ and H 40/50 EP™ on-highway products. Allison recommends that customers using TES 295® Approved Fluid consider Allison’s newest fluid spec, TES 668®, for their next service.

INTERESTING:  How much material does it take to make an electric car battery?

How often should you change Allison 1000 transmission fluid?

Although GM recommends the Allison 1000 trans fluid and external filter be changed when the HD’s oil monitor says – or every 25,000 miles for HDs used in severe service – Rod Halsten, a GM master technician in Tuscaloosa, Alabama, says let the trans fluid color and smell be the fluid-change indicators.

How much fluid does my transmission hold?

In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much. It is advisable to put in little amounts at a time.

What is TES 295 transmission fluid?

Kendall SHP 295 is a full synthetic, heavy-duty automatic transmission fluid that offers excellent friction durability to ensure smooth shifting, outstanding low-temperature properties for year-round use and easy shifting in cold weather, as well as rust and corrosion protection.

How many gallons does an Allison Transmission take?

2 Gallons of Allison Transynd synthetic fluid- (We have found this fluid to be far superior to anything else available.) It is completely compatible with Dexron 3 and Dexron 6 designed specifically for the Allison transmission. 1 genuine Allison spin on transmission filter.

Can you mix dexron 3 with TranSynd?

Both are good fluids, but they are not the same. They CAN be mixed, but if you mix them, you bring the capability of the trans fluid down from the TES-295 fluid to the level of the TES-389 spec.

INTERESTING:  How do you protect your car from a flood?

Can I use deXRon 3 in Allison Transmission?

effective January 1, 2007, general motors no longer licenses deXRon®-iii fluids. … deXRon®-Vi shall not be used in allison 500, 600 or 700 series transmissions (at, mt, ht, ht/V/Clt products).

What type of transmission fluid does a Duramax diesel take?

With the manual you use GM TranSynd Full synthetic trans fluid.

Are all Allison transmissions automatic?

Allison transmissions are the only fully automatic models on the market. Through the years, Allison has updated and upgraded their technology, which they call “Generations”. This can make it a bit confusing when trying to find parts.