Valvoline™ Type F is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. It is designed for use where Ford specifications M2C33-F, M2C33-G and Ford Type F fluids are recommended.
What is Type F transmission fluid equivalent?
This type of drive train fluid should not be used in automatics that require Type F. It can be replaced with Mercon or Mercon V specification.
Is Type F transmission fluid the same as dexron?
General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. … This fluid was used in all Ford transmissions until 1977 and most Ford transmissions until 1980.
What is Ford Type F transmission?
FORD TYPE F AUTOMATIC TRANSMISSION FLUID
Phillips 66® Type F ATF is specifically designed for use in automatic transmissions in passenger cars and light trucks manufactured by Ford Motor Company prior to 1977, and in many 1977-1981 models.
Can I mix Type F and dexron?
As to ATF, no problem mixing Dexron and Type F, one can actually fine tune shift harshness as Type F is in fact “grippier”.
What is the difference between Type F and mercon?
What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.
What vehicles use Type F transmission fluid?
Havoline Automatic Transmission Fluid Type F is recommended for automatic transmissions in Ford, Mercury, and Lincoln passenger cars and light trucks manufactured by Ford Motor Company and certain other makes prior to 1977, and some makes from 1977 to 1981 (consult the vehicle owners manual).
Can I use Type F transmission fluid?
Mobil Type F ATF is recommended by ExxonMobil for use in applications requiring Type F fluid as follows: Automatic transmissions in certain older Toyota, Mazda, Volvo, and other imported vehicles that require an ESW-M2C33-F fluid. In addition, this type of ATF is specified for some Ford power steering systems.
Is Type F compatible with mercon?
Type F is not compatible with any other ATF. Specifically, it is not compatible with Mercon ATFs. Ford Type H—developed for the C5 Ford automatic transmission introduced in 1981, it has been superseded by Mercon. Type H is not compatible with Type F and should not be used in a transmission requiring Type F.
Can you mix mercon and Type F?
It’s generally held that a quart or two of F and the rest of a C4 filled with Mercon works fine.
What happens if you put the wrong type of transmission fluid in your car?
Automatic transmissions must only use the fluid specified by the automaker, such as General Motors’ Dexron series or Toyota’s Type T. Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission.
Can you use Type F transmission fluid in a Chevy?
Type “F” fluid is a heaver viscosity. Stands more heat also. Just the installation of type “F” fluid will have a firmer shift. You can not use it in a any of the GM overdrive transmissions.
Is dexron III Type F?
Unless you’re talking about a classic car or an antique, you can be pretty sure your car doesn’t use Type F. Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports.
Can you mix type F with dexron 3?
Yes. A newer (in the last 40 years) rebuild of a C4 means it can use Dexron and work just fine. Some people like to use Type just because the antique service manuals say to. Some folks use Dexron and then a single quart of Type F for the additives.
Can you mix two types of transmission fluid?
No, we can’t mix different transmission fluids. Because each transmission fluid has different characteristics. Different transmission fluids are prepared considering various factors.