The best way to ship a transmission is by less-than-truckload (LTL) freight. LTL freight is a method of shipping that consolidates various shipments going to the same place into one trailer. You are essentially sharing space with other people to create a full truckload.
What is the cheapest way to ship a transmission?
UPS typically has the best rates, but if you have a business or freight account, it will almost always be cheapest to ship it through that. Securely strapped to a pallet, and wrapped in plastic. Wrapping in a shipping blanket first has never hurt a transmission either, but it has certainly saved a few.
How do I ship a freight transmission?
Use double wall cardboard or a shipping blanket to wrap the exterior of that transmission. Use shrink wrap to secure the entire unit and keep any potential mess from leaking. Measure the height width and depth of your shipment. Get an accurate weight of the total shipment )including packaging).
How do you ship a transmission and motor?
It can be crated, but typically also requires palletizing during the shipping process:
- Place the cleaned and drained transmission, crated or uncrated, in the center of the pallet.
- Secure it in place using ratchet straps.
- Cover the transmission in double-walled cardboard.
How long does it take to ship a transmission?
A: Typical shipping time usually takes between 7-14 business days, but could be a little longer due to unusual circumstances (such as weather, volume, etc…)
How much does it cost to mail a transmission?
Prices vary based on distance (how close you are to shipping terminals) and whether you pallet or crate for shipping, but the average is around $300. You may also opt for a service that will do the crating for you at an average cost of about $100. Protect your engine from transport damage by packing it securely.
How do you ship a transmission on a pallet?
If you’re shipping on a pallet, make sure the transmission is centered to avoid any shifting. Secure it in place using bands, then wrap it in double-walled cardboard, and finish it with shrink wrap. Like an engine, the transmission must be fully concealed.
Can you ship transmission fluid?
It is permitted only in domestic mail via surface transportation provided the fluid can qualify as a consumer commodity material or ORM-D, and is sent within the quantity limitations and packaging requirements stated in 343.21.
How much does it cost to ship a motor across country?
The cost to ship an engine can vary based on size, weight, distance traveled, and several other factors. In general, the cost to ship most engines runs from $120 – $380. Our free freight quote tool can give you a precise freight rate based on the engine you plan to ship.
How do you ship a motor on a pallet?
You will need to use a pallet that is larger than the engine itself. Try to have at least 4-inches of space between the edge of the motor and the edge of the pallet. Center the engine on the pallet and strap it down using either steel banding, industrial plastic straps, chains, strong ropes, or durable ratchet straps.
Is aamco a good company?
Awesome company to work for
AAMCO takes care of its employees, pays well, offers decent benefits and is good for people looking for a great balance of stability and experience. The community appreciates our good customer service. I don’t have a single negative thing to say about AAMCO.
How much does a transmission weigh?
You can expect an average transmission weight to be about 100 to 400 pounds (45 to 181 kg) or about 226 lbs (103 kg) for a standard size transmission. Generally, the lighter a transmission is, the higher the performance is, although it depends on the vehicle.
Do you have to remove engine to replace transmission?
Hello – no, you do not have to remove the engine in order to remove and service the transmission. As with most front-wheel drive vehicles, dropping any combination of the engine/transmission or both requires some extra equipment, and caution, but it is quite manageable.