You asked: Will a c6 transmission bolt a 302?

Premium Member. The C6 will physically bolt onto either the 289 or 302 but I don’t think it will fit the 66 tunnel without some modification to the tunnel. It should fit the 68 tunnel fine, since a big block with a C6 was available that year.

What transmission will fit a Ford 302?

For years, the Ford C-4 automatic was a reliable three-speed automatic transmission for many Ford products, and is fine for most 289, 302 or 351 engines that have received modest modifications.

What motors will bolt to a C6 transmission?

The C6 was produced with four basic bell-housing bolt patterns over its long production life and is a very rugged transmission designed for high-power applications. The round six-bolt pattern is for FE-series big-blocks such as the 332, 352, 361, 360, 390, 406, 427, and 428 engines.

What engines are compatible with a C6 transmission?

The C6 was used in trucks and cars with larger engines. Five different bell housing varieties exist for use with various Ford engine families: The Windsor pattern was used on the 300 I6, the Ford Windsor engines and the 351 Cleveland. The 460 pattern was used on the 351M and 400 and all of the Ford “385” engines.

INTERESTING:  Your question: Can an electric motor be a resistor?

Will a C6 transmission fit a 289 engine?

This C6 Transmission is equipped with TCI StreetFighter components to handle up to 675 HP from Ford 289/302/351C/351W engines.

Which is better C4 or C6 transmission?

The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

What is the strongest Ford transmission?

There is the Ford AOD (automatic overdrive) transmission on one hand, and the Turbo 400 (TH400), on the other. However, car enthusiasts may be quick to settle for the Turbo 400 due to the popular belief that it is the king of performance transmission.

How much horsepower can a C6 transmission handle?

4. C6 Planetary Carriers. Switching to C6 planetary carriers that are stronger can also improve the performance of your transmission. Here, the new planetaries can surge the transmission’s horsepower to over 2000 hp, and the latter can be expected if a change has been made to the input shaft.

How strong is a C6 transmission?

As mentioned, the C6 transmission is quite strong and was paired with many of the larger V8 engines from Ford. This 3 speed automatic transmission was designed to handle up to 475 lb-ft of torque, although the C6 with the aftermarket upgrades used for drag racing can handle significantly more torque.

Does a C6 transmission have overdrive?

The Ford C6 automatic transmission is a great example of this in the automotive world because it’s also the foundation of newer automatics in Ford trucks. … Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios.

INTERESTING:  Which car has cheapest spare parts in India?

How many bolts does a C6 transmission have?

The C6 was produced with four basic bellhousing bolt patterns over its long production life and is a very rugged transmission designed for high-power applications. The round six-bolt pattern is for FE-series big-blocks such as the 332, 352, 361, 360, 390, 406, 427, and 428 engines.

What C6 transmission do I have?

Determine where the speedometer driver gear is located. If it is on the driver’s side of the extension housing, it is the C6 but a C4, if it is at the rear of the transmission at the point, then driveshaft is connected to the transmission’s back.

Will a C6 transmission bolt up to a 460?

Diesel Trans to 460 Engine: For those of you who have a C6 automatic behind the diesel, it’s really just a 429/460-pattern case; throw away the factory-installed trans-to-diesel engine block adaptor plate, get a 460 Ford separator plate, and bolt everything directly up to the 460, using a 460-pattern auto trans …

Will a C6 transmission fit a 302 Ford?

Premium Member. The C6 will physically bolt onto either the 289 or 302 but I don’t think it will fit the 66 tunnel without some modification to the tunnel. It should fit the 68 tunnel fine, since a big block with a C6 was available that year.

Will a C4 transmission fit a 390?

*This Performance Automatic Bellhousing is designed to use the factory starter and flexplate. … Order this Performance Automatic PA26390 Pro Fit Bellhousing for your 390, 427 or 428 FE Engine with a C4 Automatic Transmission today from CJ Pony Parts.

INTERESTING:  How much does it cost to recondition an engine?

When did the 351 Cleveland come out?

The 351C, introduced in 1969 for the 1970 model year, is commonly referred to as the 351 Cleveland after the Brook Park, Ohio, Cleveland Engine plant in which most of these engines were manufactured.